Professional Electrical Services
Expert electrical testing and inspections, official boletines, fault finding, and 24/7 emergency services across Costa del Sol. Calibrated Fluke and Megger test equipment. 20+ years experience.
Quick Summary: Electrical Services
REBT authorized installer with 20+ years experience. Calibrated test equipment, official certificates via TECI, and 24/7 emergency service. We cover the entire Málaga province.
Authorized Installer
Junta de Andalucía
Fully Insured
€2M Liability
20+ Years
Experience
4.9/5 Rating
156+ Reviews
We issue Electrical Installation Certificates (CI) and Technical Design Reports (MTD) submitted electronically via TECI to the Junta de Andalucía.
We use Fluke and Megger test equipment annually calibrated with calibration certificates available for every job.
Stamped certificates in 2-4 business days after inspection. Endesa connections in 7-15 days with our complete paperwork handling.
Our Electrical Services
Click any service to see detailed specifications, pricing, and equipment
Comprehensive REBT-compliant electrical testing using calibrated Fluke and Megger equipment. Full inspection reports for insurance, property sales, and regulatory compliance.
Expert fault diagnosis using advanced test equipment. We locate intermittent faults, short circuits, earth leakage, and power quality issues that other electricians miss.
Specialist fire risk assessment for insurance, rental properties, and business premises. Thermal imaging identifies overloaded circuits, loose connections, and fire hazards before they cause damage.
Official Junta de Andalucía registered electrical certificates (boletines). Required for Endesa connections, power increases, property sales, and rental licenses. We handle the complete TECI submission process.
Main electrical panel inspection, testing, and modern upgrades. We replace outdated fuse boxes with Schneider Electric and ABB consumer units featuring RCBOs, surge protection, and smart metering compatibility.
Multi-level surge protection for homes and businesses. Protect expensive electronics, solar inverters, EV chargers, and smart home systems from lightning strikes and grid surges common in Málaga.
Complete Endesa service: new connections (alta de luz), power increases, tariff optimization, and supply problems. We handle all paperwork and technical requirements with the utility company.
Safe, code-compliant rewiring for older properties. We replace outdated aluminum wiring, two-core cables, and undersized circuits with modern copper cabling meeting REBT 2002 standards.
Round-the-clock emergency electrical service across Costa del Sol. Power outages, dangerous faults, burning smells, and electrical emergencies handled by experienced electricians.
Comprehensive REBT-compliant electrical testing using calibrated Fluke and Megger equipment. Full inspection reports for insurance, property sales, and regulatory compliance.
Fluke 1664FC
Multifunction tester for all REBT testing
Megger MIT430
Insulation resistance tester up to 1000V
FLIR E8-XT
Thermal camera for hot spot detection
Fluke 376FC
Clamp meter with iFlex for high currents
What is a boletín eléctrico and when do I need one in Málaga?
A boletín eléctrico (Certificado de Instalación Eléctrica) is an official certificate confirming your electrical installation meets REBT regulations. You need one for: new Endesa connections (alta de luz), power increases, selling or renting property, business licenses, and any electrical modifications. In Málaga/Andalucía, we submit via the Junta de Andalucía TECI system. The certificate is valid for 20 years. Cost: €95-150 including inspection and TECI submission.
How much does electrical testing and inspection cost in Costa del Sol?
Electrical testing in Costa del Sol costs €150-350 depending on property size and complexity. A standard 3-bedroom apartment inspection is €150-200, while a 4+ bedroom villa with pool equipment costs €250-350. We use calibrated Fluke and Megger test equipment and provide full REBT-compliant inspection reports. Emergency same-day testing available for €50 supplement.
What test equipment do professional electricians use in Spain?
Professional electricians in Spain use calibrated multifunction testers for REBT compliance. We use: Fluke 1664FC multifunction tester (insulation, RCD, loop impedance), Megger MIT430 insulation resistance tester, FLIR E8-XT thermal camera for fire risk assessment, Fluke 376FC clamp meter for current measurements, and Megger TDR2000 cable fault locator. All equipment is annually calibrated with certificates.
How do I get an Endesa connection (alta de luz) for my property?
To get an Endesa connection in Málaga: 1) Contact an authorized installer (instalador autorizado) like us, 2) We inspect your electrical installation and issue a boletín, 3) We submit the certificate via TECI to Junta de Andalucía, 4) You receive the stamped certificate (2-4 days), 5) Apply to Endesa with the boletín - connection within 7-15 days. We handle steps 1-4 completely. Total cost including boletín: €195-350 depending on installation upgrades needed.
What is REBT and why is it important for electrical work in Spain?
REBT (Reglamento Electrotécnico de Baja Tensión) is the Spanish low-voltage electrical regulations under Royal Decree 842/2002. All electrical installations must comply with REBT for: legal connections, insurance validity, property sales, and safety. Key requirements include: differential protection (RCDs), proper earthing, cable sizing calculations, and circuit protection. Non-compliant installations can void insurance and block property transactions.
Do I need surge protection for my home in Málaga?
Yes, surge protection is highly recommended in Málaga due to frequent lightning storms (especially May-September) and grid voltage fluctuations. Essential for: solar PV systems (protects inverters worth €1,000+), EV chargers, smart home systems, and expensive electronics. We install Type 1+2 combined surge protection (ABB OVR, Schneider iPRD) at the main panel, plus Type 3 at sensitive equipment. Cost: €195-450 for whole-home protection.
How long does a full house rewire take in Spain?
A full house rewire in Spain takes 3-7 days depending on property size. 2-bedroom apartment: 3-4 days, 3-4 bedroom villa: 5-6 days, large property with outbuildings: 7+ days. We use minimal disruption techniques (pulling cables through existing conduits where possible) and can work room-by-room to maintain power. Price: €2,500-8,000+ depending on size. Includes new consumer unit, all cabling, sockets, switches, and boletín certificate.
What brands of electrical panels do you install?
We install premium European consumer units: Schneider Electric Acti9 (our recommended choice - best protection and reliability), ABB S200 series (excellent value, German engineering), Hager Design 30 (compact, modern aesthetics), and Legrand DX3 (French quality). All feature RCBO protection for individual circuits, surge protection capability, and smart meter compatibility. We never install cheap unbranded units that compromise safety.
What is a fire risk electrical assessment?
A fire risk electrical assessment uses thermal imaging (FLIR cameras) to identify electrical fire hazards: overloaded circuits, loose connections, degraded cables, and faulty equipment. Required for: rental properties (insurance), commercial premises (fire regulations), and older properties (pre-purchase). We check consumer units, wiring, sockets, and appliance connections. Report includes thermal images and priority remediation recommendations. Cost: €195-350.
How do I increase my electrical power capacity (potencia) with Endesa?
To increase power capacity with Endesa: 1) Calculate your required power (we help with this), 2) Check if your installation supports the increase (wiring, protection), 3) Upgrade consumer unit if needed (larger main switch, cables), 4) We issue a new boletín for the higher power, 5) Submit via TECI to Junta de Andalucía, 6) Apply to Endesa with stamped certificate. Timeline: 1-2 weeks. Cost: €195-500 depending on upgrades required.
Need a Professional Electrician?
Get expert advice and installation from Costa del Sol's certified electricians. 20+ years experience with calibrated test equipment.
Authorized Installer - We handle the complete boletín and Endesa connection process