Case Study — Solar 2026

Solar Panels Rescued in Mijas — Wind Damage Emergency & Proper Reinstallation

A traditional Mijas Pueblo townhouse with a terracotta barrel-tile roof — panels had been held in place with wire ties rather than proper rail clamps, and strong coastal winds pulled them free. LIT responded to make the roof safe, then returned once conditions allowed for a correct professional installation.

Mijas Pueblo, Málaga May 2026Ben HaydenBy Ben Hayden
Completed reinstallation on the traditional Mijas Pueblo terracotta tile roof — panels properly secured on aluminium rails, with panoramic Mediterranean coast views confirming an excellent south-facing orientation.
Completed reinstallation on the traditional Mijas Pueblo terracotta tile roof — panels properly secured on aluminium rails, with panoramic Mediterranean coast views confirming an excellent south-facing orientation.

Project Overview

Location
Mijas Pueblo, Málaga
Property Type
Traditional village townhouse
Service
Solar
Key Issue
Panels loose after high winds
Key Result
Panels safe & properly reinstalled
—
Annual Production
—
Energy Savings
—
Annual Savings
—
Payback Period
—
CO₂ Reduction

The Challenge: Panels loose after high winds

Strong coastal winds common on the Mijas hillside caused solar panels to come loose from their original fixing points. When we inspected the underside of the panels, the reason was immediately clear: the original installer had used plastic wire ties to hold the panel frames to the roof rather than proper engineered rail clamps. Wire ties are not a valid fixing method for solar panels — they have no shear strength, degrade in UV, and are not part of any certified solar mounting system. Once the ties failed, the panels were free to move. The roof needed to be made safe without delay, and the panels reinstalled correctly as soon as the weather allowed.

The Solution

Solar panels came loose during strong winds at a traditional Mijas Pueblo property. LIT made them safe immediately, then reinstalled them correctly on proper aluminium rail mounting once the weather settled.

Technical Specifications

  • Emergency response: panels made safe during adverse weather
  • Original installation used wire ties — no proper rail clamps
  • Full removal and temporary securing of all panels
  • Professional reinstallation on aluminium rail mounting system
  • Traditional Andalusian terracotta tile roof — Mijas Pueblo village setting
  • Panoramic Mediterranean coast views confirm south-facing orientation

Results

Panels safe & properly reinstalled

Backed by Research

References for checking the proposed design. These sources do not certify this project's performance, savings, eligibility or commissioning records.

Estimate solar yield for the actual site

Annual generation depends on location, orientation, tilt, shading and system losses. An irradiance figure is not a guaranteed yield per installed kilowatt. State the assumptions and compare the estimate with the property's consumption.

European Commission — PVGIS ↗

Check the applicable self-consumption arrangement

RD 244/2019 regulates administrative, technical and economic conditions for self-consumption. Export compensation is subject to the applicable arrangement and contract; exported energy is not automatically valued at the retail import price.

BOE — RD 244/2019 ↗

Tax relief needs separate eligibility checks

Do not assume solar qualifies for an income-tax deduction or a standard municipal IBI discount. Check current AEAT conditions and the property's municipal ordinance, required evidence, dates and application process before including an incentive in a budget.

Agencia Tributaria — current tax guidance ↗

Work Completed

  • Emergency site visit — panels made safe and secured
  • Inspection of original fixing method (wire ties confirmed — not compliant)
  • Full removal of all panels from failed mounting
  • Roof checked for any tile damage during wind event
  • New aluminium rail mounting system installed correctly
  • All panels reinstalled with proper engineered clamps
  • Cable management tidied and re-secured
  • Final inspection and system check

Photo Gallery

Frequently Asked Questions

About the Author

Ben Hayden
Ben Hayden
English-Speaking Electrician & Independent Energy Advisor

Ben Hayden is an English speaking electrician and independent energy advisor based in Marbella, Spain, with over 15 years of electrical experience across Europe. He provides independent energy and electrical checks for overseas property owners and managers across the Costa del Sol — helping clients cut electricity bills, navigate Spanish regulations, and make confident decisions on solar PV, heat pump, EV charger and battery storage projects. Ben advises in plain English on projects where the paperwork is in Spanish and the stakes are high. His writing has appeared in ExpatArrivals, The Olive Press, Euro Weekly News, BuildingTalk and pv magazine.

    We Respect Your Privacy

    Optional visit and advertising measurement needs your permission. Change your choice anytime in the footer.